#elif HAS_BLE == true
#include "esp_bt_main.h"
#include "esp_bt_device.h"
- // TODO: Remove
- #define SerialBT Serial
+ #include "BleSerial.h"
+ BleSerial SerialBT;
#endif
#elif MCU_VARIANT == MCU_NRF52
#endif
#elif MCU_VARIANT == MCU_NRF52
-uint8_t eeprom_read(uint32_t mapped_addr);
+ uint8_t eeprom_read(uint32_t mapped_addr);
-void bt_stop() {
- if (bt_state != BT_STATE_OFF) {
- bt_allow_pairing = false;
- bt_state = BT_STATE_OFF;
+ void bt_stop() {
+ if (bt_state != BT_STATE_OFF) {
+ bt_allow_pairing = false;
+ bt_state = BT_STATE_OFF;
+ }
}
-}
-void bt_disable_pairing() {
- bt_allow_pairing = false;
- bt_ssp_pin = 0;
- bt_state = BT_STATE_ON;
-}
+ void bt_disable_pairing() {
+ bt_allow_pairing = false;
+ bt_ssp_pin = 0;
+ bt_state = BT_STATE_ON;
+ }
-void bt_pairing_complete(uint16_t conn_handle, uint8_t auth_status) {
- if (auth_status == BLE_GAP_SEC_STATUS_SUCCESS) {
- bt_disable_pairing();
- } else {
- bt_ssp_pin = 0;
- }
-}
+ void bt_pairing_complete(uint16_t conn_handle, uint8_t auth_status) {
+ if (auth_status == BLE_GAP_SEC_STATUS_SUCCESS) {
+ bt_disable_pairing();
+ } else {
+ bt_ssp_pin = 0;
+ }
+ }
-bool bt_passkey_callback(uint16_t conn_handle, uint8_t const passkey[6], bool match_request) {
- for (int i = 0; i < 6; i++) {
- // multiply by tens however many times needed to make numbers appear in order
- bt_ssp_pin += ((int)passkey[i] - 48) * pow(10, 5-i);
- }
- kiss_indicate_btpin();
- if (match_request) {
- if (bt_allow_pairing) {
- return true;
- }
- }
- return false;
-}
+ bool bt_passkey_callback(uint16_t conn_handle, uint8_t const passkey[6], bool match_request) {
+ for (int i = 0; i < 6; i++) {
+ // multiply by tens however many times needed to make numbers appear in order
+ bt_ssp_pin += ((int)passkey[i] - 48) * pow(10, 5-i);
+ }
+ kiss_indicate_btpin();
+ if (match_request) {
+ if (bt_allow_pairing) {
+ return true;
+ }
+ }
+ return false;
+ }
-void bt_connect_callback(uint16_t conn_handle) {
- bt_state = BT_STATE_CONNECTED;
- cable_state = CABLE_STATE_DISCONNECTED;
-}
+ void bt_connect_callback(uint16_t conn_handle) {
+ bt_state = BT_STATE_CONNECTED;
+ cable_state = CABLE_STATE_DISCONNECTED;
+ }
-void bt_disconnect_callback(uint16_t conn_handle, uint8_t reason) {
- bt_state = BT_STATE_ON;
-}
+ void bt_disconnect_callback(uint16_t conn_handle, uint8_t reason) {
+ bt_state = BT_STATE_ON;
+ }
-bool bt_setup_hw() {
- if (!bt_ready) {
- #if HAS_EEPROM
- if (EEPROM.read(eeprom_addr(ADDR_CONF_BT)) == BT_ENABLE_BYTE) {
- #else
- if (eeprom_read(eeprom_addr(ADDR_CONF_BT)) == BT_ENABLE_BYTE) {
- #endif
- bt_enabled = true;
- } else {
- bt_enabled = false;
- }
- Bluefruit.configPrphBandwidth(BANDWIDTH_MAX);
- Bluefruit.autoConnLed(false);
- if (Bluefruit.begin()) {
- Bluefruit.setTxPower(4); // Check bluefruit.h for supported values
- Bluefruit.Security.setIOCaps(true, true, false);
- Bluefruit.Security.setPairPasskeyCallback(bt_passkey_callback);
- Bluefruit.Periph.setConnectCallback(bt_connect_callback);
- Bluefruit.Periph.setDisconnectCallback(bt_disconnect_callback);
- Bluefruit.Security.setPairCompleteCallback(bt_pairing_complete);
- const ble_gap_addr_t gap_addr = Bluefruit.getAddr();
- char *data = (char*)malloc(BT_DEV_ADDR_LEN+1);
- for (int i = 0; i < BT_DEV_ADDR_LEN; i++) {
- data[i] = gap_addr.addr[i];
- }
+ bool bt_setup_hw() {
+ if (!bt_ready) {
#if HAS_EEPROM
- data[BT_DEV_ADDR_LEN] = EEPROM.read(eeprom_addr(ADDR_SIGNATURE));
+ if (EEPROM.read(eeprom_addr(ADDR_CONF_BT)) == BT_ENABLE_BYTE) {
#else
- data[BT_DEV_ADDR_LEN] = eeprom_read(eeprom_addr(ADDR_SIGNATURE));
+ if (eeprom_read(eeprom_addr(ADDR_CONF_BT)) == BT_ENABLE_BYTE) {
#endif
- unsigned char *hash = MD5::make_hash(data, BT_DEV_ADDR_LEN);
- memcpy(bt_dh, hash, BT_DEV_HASH_LEN);
- sprintf(bt_devname, "RNode %02X%02X", bt_dh[14], bt_dh[15]);
- free(data);
-
- bt_ready = true;
- return true;
+ bt_enabled = true;
+ } else {
+ bt_enabled = false;
+ }
+ Bluefruit.configPrphBandwidth(BANDWIDTH_MAX);
+ Bluefruit.autoConnLed(false);
+ if (Bluefruit.begin()) {
+ Bluefruit.setTxPower(4); // Check bluefruit.h for supported values
+ Bluefruit.Security.setIOCaps(true, true, false);
+ Bluefruit.Security.setPairPasskeyCallback(bt_passkey_callback);
+ Bluefruit.Periph.setConnectCallback(bt_connect_callback);
+ Bluefruit.Periph.setDisconnectCallback(bt_disconnect_callback);
+ Bluefruit.Security.setPairCompleteCallback(bt_pairing_complete);
+ const ble_gap_addr_t gap_addr = Bluefruit.getAddr();
+ char *data = (char*)malloc(BT_DEV_ADDR_LEN+1);
+ for (int i = 0; i < BT_DEV_ADDR_LEN; i++) {
+ data[i] = gap_addr.addr[i];
+ }
+ #if HAS_EEPROM
+ data[BT_DEV_ADDR_LEN] = EEPROM.read(eeprom_addr(ADDR_SIGNATURE));
+ #else
+ data[BT_DEV_ADDR_LEN] = eeprom_read(eeprom_addr(ADDR_SIGNATURE));
+ #endif
+ unsigned char *hash = MD5::make_hash(data, BT_DEV_ADDR_LEN);
+ memcpy(bt_dh, hash, BT_DEV_HASH_LEN);
+ sprintf(bt_devname, "RNode %02X%02X", bt_dh[14], bt_dh[15]);
+ free(data);
+
+ bt_ready = true;
+ return true;
+ } else { return false; }
} else { return false; }
- } else { return false; }
-}
+ }
-void bt_start() {
- if (bt_state == BT_STATE_OFF) {
- Bluefruit.setName(bt_devname);
- bledis.setManufacturer(BLE_MANUFACTURER);
- bledis.setModel(BLE_MODEL);
- // start device information service
- bledis.begin();
+ void bt_start() {
+ if (bt_state == BT_STATE_OFF) {
+ Bluefruit.setName(bt_devname);
+ bledis.setManufacturer(BLE_MANUFACTURER);
+ bledis.setModel(BLE_MODEL);
+ // start device information service
+ bledis.begin();
- SerialBT.begin();
+ SerialBT.begin();
- blebas.begin();
+ blebas.begin();
- // non-connectable advertising
- Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE);
- Bluefruit.Advertising.addTxPower();
+ // non-connectable advertising
+ Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE);
+ Bluefruit.Advertising.addTxPower();
- // Include bleuart 128-bit uuid
- Bluefruit.Advertising.addService(SerialBT);
+ // Include bleuart 128-bit uuid
+ Bluefruit.Advertising.addService(SerialBT);
- // There is no room for Name in Advertising packet
- // Use Scan response for Name
- Bluefruit.ScanResponse.addName();
+ // There is no room for Name in Advertising packet
+ // Use Scan response for Name
+ Bluefruit.ScanResponse.addName();
- Bluefruit.Advertising.start(0);
+ Bluefruit.Advertising.start(0);
- bt_state = BT_STATE_ON;
- }
-}
-
-bool bt_init() {
- bt_state = BT_STATE_OFF;
- if (bt_setup_hw()) {
- if (bt_enabled && !console_active) bt_start();
- return true;
- } else {
- return false;
+ bt_state = BT_STATE_ON;
+ }
+ }
+
+ bool bt_init() {
+ bt_state = BT_STATE_OFF;
+ if (bt_setup_hw()) {
+ if (bt_enabled && !console_active) bt_start();
+ return true;
+ } else {
+ return false;
+ }
+ }
+
+ void bt_enable_pairing() {
+ if (bt_state == BT_STATE_OFF) bt_start();
+ bt_allow_pairing = true;
+ bt_pairing_started = millis();
+ bt_state = BT_STATE_PAIRING;
+ }
+
+ void update_bt() {
+ if (bt_allow_pairing && millis()-bt_pairing_started >= BT_PAIRING_TIMEOUT) {
+ bt_disable_pairing();
}
-}
-
-void bt_enable_pairing() {
- if (bt_state == BT_STATE_OFF) bt_start();
- bt_allow_pairing = true;
- bt_pairing_started = millis();
- bt_state = BT_STATE_PAIRING;
-}
-
-void update_bt() {
- if (bt_allow_pairing && millis()-bt_pairing_started >= BT_PAIRING_TIMEOUT) {
- bt_disable_pairing();
}
-}
#endif