Remove last remaining AVR stuff

diff --git a/Makefile b/Makefile
index fa924573915b3dc264affa54dfcc0c79ba47b16a..d80272404ef7374cd5fd3d2022fc90363700a486 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -21,12 +21,7 @@ clean:
        -rm -r ./build
        -rm ./Release/rnode_firmware*
 
-prep: prep-avr prep-esp32 prep-samd
-
-prep-avr:
-       arduino-cli core update-index --config-file arduino-cli.yaml
-       arduino-cli core install arduino:avr --config-file arduino-cli.yaml
-       arduino-cli core install unsignedio:avr --config-file arduino-cli.yaml
+prep: prep-esp32 prep-samd
 
 prep-esp32:
        arduino-cli core update-index --config-file arduino-cli.yaml
@@ -59,12 +54,6 @@ upload-spiffs:
        @echo Deploying SPIFFS image...
        python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
 
-firmware:
-       arduino-cli compile --fqbn unsignedio:avr:rnode
-
-firmware-mega2560:
-       arduino-cli compile --fqbn arduino:avr:mega
-
 firmware-tbeam:
        arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\""
 
@@ -125,12 +114,6 @@ firmware-rak4631_sx1280:
 firmware-freenode:
        arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x21\""
 
-upload:
-       arduino-cli upload -p /dev/ttyUSB0 --fqbn unsignedio:avr:rnode
-
-upload-mega2560:
-       arduino-cli upload -p /dev/ttyACM0 --fqbn arduino:avr:mega
-
 upload-tbeam:
        arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:t-beam
        @sleep 1
@@ -372,11 +355,6 @@ release-genericesp32:
        zip --junk-paths ./Release/rnode_firmware_esp32_generic.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_esp32_generic.boot_app0 build/rnode_firmware_esp32_generic.bin build/rnode_firmware_esp32_generic.bootloader build/rnode_firmware_esp32_generic.partitions
        rm -r build
 
-release-mega2560:
-       arduino-cli compile --fqbn arduino:avr:mega -e --build-property "compiler.cpp.extra_flags=\"-DMODEM=0x01\""
-       cp build/arduino.avr.mega/RNode_Firmware_CE.ino.hex Release/rnode_firmware_m2560.hex
-       rm -r build
-
 release-rak4631:
        arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\" \"-DBOARD_VARIANT=0x12\""
        cp build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware_CE.ino.hex build/rnode_firmware_rak4631.hex