Updated makefile

diff --git a/Makefile b/Makefile
index e17ae066bd8b4df78027bc7c83c3e8cae64ebc78..82f1c74ab628038df001df6f717efc9fa8ecb22d 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -40,6 +40,7 @@ prep-samd:
 prep-nrf:
        arduino-cli core update-index --config-file arduino-cli.yaml
        arduino-cli core install rakwireless:nrf52 --config-file arduino-cli.yaml
+       pip install adafruit-nrfutil --upgrade
 
 console-site:
        make -C Console clean site
@@ -92,6 +93,9 @@ firmware-rnode_ng_20:
 firmware-rnode_ng_21:
        arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\" \"-DMODEM=0x01\""
 
+firmware-rnode_ng_22:
+       arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DMODEM=0x03\""
+
 firmware-featheresp32:
        arduino-cli compile --fqbn esp32:esp32:featheresp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\" \"-DMODEM=0x01\""
 
@@ -156,6 +160,13 @@ upload-rnode_ng_21:
        @sleep 3
        python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
 
+upload-rnode_ng_22:
+       arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:esp32s3
+       @sleep 1
+       rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin)
+       @sleep 3
+       python ./Release/esptool/esptool.py --chip esp32s3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
+
 upload-featheresp32:
        arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:featheresp32
        @sleep 1