Added flashing support for T3S3

diff --git a/Makefile b/Makefile
index 6f893a35786175055e5e6e7cb8286ffc860d5ecd..4dfc86d9b8ce7d4d787b8138c8fe4a8dd7f9a1e0 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -176,11 +176,17 @@ upload-rnode_ng_21:
        python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
 
 upload-t3s3:
+       @echo
+       @echo Put board into flashing mode by holding BOOT button while momentarily pressing the RESET button. Hit enter when done.
+       @read
        arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:esp32s3
+       @sleep 2
+       python ./Release/esptool/esptool.py --chip esp32s3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
+       @echo
+       @echo Press the RESET button on the board now, and hit enter
+       @read
        @sleep 1
        rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin)
-       @sleep 3
-       python ./Release/esptool/esptool.py --chip esp32s3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
 
 upload-featheresp32:
        arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:featheresp32