Added display reconditioning function

diff --git a/Makefile b/Makefile
index 3a1863403b48f9fb86f83a6dfab6f161667457a4..0d0fb51dd829745928b384acfd57463e2c5a8ae3 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -181,8 +181,8 @@ upload-heltec32_v3:
        arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:heltec_wifi_lora_32_V3
        @sleep 1
        rnodeconf /dev/ttyUSB0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware.ino.bin)
-       #@sleep 3
-       #python ./Release/esptool/esptool.py --chip esp32-s3 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
+       @sleep 3
+       python ./Release/esptool/esptool.py --chip esp32-s3 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
 
 upload-tdeck:
        arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:esp32s3

diff --git a/RNode_Firmware.ino b/RNode_Firmware.ino
index f890cdec5e3bc5cb19df8a106b301dadb7f6d0ec..6bdf4656a3599a66d1e1d04a2db1b3762c84fac4 100644 (file)
--- a/RNode_Firmware.ino
+++ b/RNode_Firmware.ino
@@ -1124,7 +1124,6 @@ void serialCallback(uint8_t sbyte) {
                 ESCAPE = false;
             }
             if (sbyte > 0x00) recondition_display = true;
-            display_unblank();
         }
       #endif
     } else if (command == CMD_NP_INT) {

diff --git a/Utilities.h b/Utilities.h
index 4eb1f78f3c92855972c64eddeb9e322bfb3fb724..1893636b8a35844ce17ef436a2222444d3df3145 100644 (file)
--- a/Utilities.h
+++ b/Utilities.h
@@ -1510,7 +1510,6 @@ void db_conf_save(uint8_t val) {
 void drot_conf_save(uint8_t val) {
        #if HAS_DISPLAY
                if (val >= 0x00 and val <= 0x03) {
-                       eeprom_update(eeprom_addr(ADDR_CONF_BSET), CONF_OK_BYTE);
                        eeprom_update(eeprom_addr(ADDR_CONF_DROT), val);
                        hard_reset();
                }