Updated makefile

diff --git a/Makefile b/Makefile
index 6019a5427846c9a63da226284b8d67ae986008b4..4f74cb9e4549337c93baa5f6c04f97864f6eaabe 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -153,11 +153,11 @@ upload-heltec32_v2:
        python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
 
 upload-heltec32_v3:
-       arduino-cli upload -p COM3 --fqbn esp32:esp32:heltec_wifi_lora_32_V3
+       arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:heltec_wifi_lora_32_V3
        @sleep 1
-       rnodeconf COM3 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware.ino.bin)
+       rnodeconf /dev/ttyUSB0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware.ino.bin)
        @sleep 3
-       python ./Release/esptool/esptool.py --chip esp32-s3 --port COM3 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
+       python ./Release/esptool/esptool.py --chip esp32-s3 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
 
 upload-rnode_ng_20:
        arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:ttgo-lora32