Updated readme

diff --git a/README.md b/README.md
index 30313ad283231610c2e5064e82a068391a5a3ec9..3cbdac08cfba23d2a7aff1db736c2f8319111158 100644 (file)
--- a/README.md
+++ b/README.md
@@ -4,6 +4,7 @@ This is the firmware for [RNode](https://unsigned.io/rnode), a very flexible LoR
 
 - Network adapter for [RNS](https://github.com/markqvist/Reticulum)
 - LoRa interface for your computer (or any device with a USB or serial port)
+- Generic [LoRa-based network adapter](https://unsigned.io/15-kilometre-ssh-link-with-rnode/) for your Linux devices
 - [Packet sniffer](https://github.com/markqvist/LoRaMon) for LoRa networks
 - LoRa development board
 - A LoRa-based KISS-compatible TNC
@@ -16,7 +17,7 @@ For adding RNode to your Arduino environment, please see [this post](https://uns
 For configuring an RNode with this firmware, please have a look at the [RNode Config Utility](https://github.com/markqvist/rnodeconfigutil).
 
 ## Current Status
-The RNode firmware has not seen much real world testing, and should be considered beta at this point.
+The RNode firmware is relatively well tested, but there's a lot of features being added, so you might still find a bug. If you do, please report it as an issue here, so I can fix it!
 
 ## Operating Modes
 RNode can operate in two modes, host-controlled (default) and TNC mode:

diff --git a/Schematics/README.md b/Schematics/README.md
index 07cd5bb0f228bb0a49a248495dcc1ff60e87ae1c..7d9db914d06366f185a830c9b826429c5b3f7658 100644 (file)
--- a/Schematics/README.md
+++ b/Schematics/README.md
@@ -7,4 +7,6 @@ Using the schematics here, it is possible to build an RNode yourself. Schematics
 - A 3.3v regulated DC supply (for supplying the LoRa chip)
 - A Semtech SX1276 module
 
-You can assemble the circuit like in the schematic, but only care about the connections going between the MCU and logic level converter, and from the logic level converter to the LoRa module, plus the supply lines, and optionally the LEDs.
\ No newline at end of file
+You can assemble the circuit like in the schematic, but only care about the connections going between the MCU and logic level converter, and from the logic level converter to the LoRa module, plus the supply lines, and optionally the LEDs.
+
+Fritzing files for breadboard setup and links to recommended components are coming soon.
\ No newline at end of file